ARO
   
     
It is currently Fri Mar 29, 2024 12:35 am

All times are UTC + 2 hours




 Page 1 of 2 [ 13 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Rear axle with lock
PostPosted: Mon Oct 01, 2012 11:01 pm 
Posesor ARO
Membru Rang 0
User avatar

Joined: Wed Feb 08, 2012 11:56 am
Posts: 20
Welcome. I would like to buy a locking rear axle for my Aro to better ease in off-road. What do you think about this axis? I've heard that some switching mechanism fails but you can convert it. Fits this axis to older Aro? Please review about the axis of the lock. I have the opportunity to buy and wonder. greetings ;)


Attachments:
DSC_7928.jpg
DSC_7928.jpg [ 63.23 KiB | Viewed 7522 times ]
Offline
 Profile  
 
 Post subject: Re: Rear axle with lock
PostPosted: Tue Oct 02, 2012 7:22 am 
Membru CLUB
Membru Rang 9
User avatar

Joined: Wed Sep 09, 2009 9:47 am
Posts: 498
Location: IASI
The actuator is rubbish, but you can use a bowden cable and spring sistem to get the locker working. The axle will fit, they were the same on all Aro 24X models, the issue is only the gear ratio, but you can change it with you own ring and pinion if is they are different.



_________________
Ciuveie: ARO244, Daewoo Tico
Offline
 Profile  
 
 Post subject: Re: Rear axle with lock
PostPosted: Tue Oct 02, 2012 10:23 am 
Posesor ARO
Membru Rang 0
User avatar

Joined: Wed Feb 08, 2012 11:56 am
Posts: 20
ok thanks. So the difference is the gear ratio? And it is necessary to translate them from the old to the axis of the lock?


Offline
 Profile  
 
 Post subject: Re: Rear axle with lock
PostPosted: Tue Oct 02, 2012 10:35 am 
Membru CLUB
Membru Rang 17
User avatar

Joined: Tue Sep 08, 2009 11:34 am
Posts: 1529
The gear Ratio COULD be different, but it might be the same.

You need to check. If it's the same (possibly 33/8) then you're set. If not, you need to change the ring and pinion from your old axle to this one.

Most likely the locking axle has 33/8 ~= 4.125 gear ratio.


Offline
 Profile  
 
 Post subject: Re: Rear axle with lock
PostPosted: Tue Oct 02, 2012 1:01 pm 
Posesor ARO
Membru Rang 0
User avatar

Joined: Wed Feb 08, 2012 11:56 am
Posts: 20
And what is the ratio of the axis lock? It would be a significant change if I interceded with the axis of the ring and pinion other than that old?


Offline
 Profile  
 
 Post subject: Re: Rear axle with lock
PostPosted: Tue Oct 02, 2012 9:37 pm 
Membru CLUB
Membru Rang 9
User avatar

Joined: Wed Sep 09, 2009 9:47 am
Posts: 498
Location: IASI
It is vital to have exactly the same gear ratio in front and back. That is why you need to check the ratios on your car and on that locking axle. If you change the ring and pinion from the old axle to the new one, is very important to adjust it properly : http://www.ehow.com/how_2159877_set-up- ... ntial.html



_________________
Ciuveie: ARO244, Daewoo Tico
Offline
 Profile  
 
 Post subject: Re: Rear axle with lock
PostPosted: Tue Oct 02, 2012 11:39 pm 
Membru CLUB
Membru Rang 17
User avatar

Joined: Tue Sep 08, 2009 11:34 am
Posts: 1529
To answer your questions:

1. What is the ratio for the locking axle - we do not know. You need to check yourself. Most likely it would be 33/8 ~= 4.125 but I cannot be 100% sure.
2. If the ratio on the new axle is the same as the old - it's all perfect. If not, it would be extremely bad to run the car in this fashion. Because AROs don't have a center differential (and are always 'locked') it would most likely cause things to break. Soon. In this case you should take the ring and pinion from your old axle and install them in the new locking axle so as to preserve your original ratio.


Offline
 Profile  
 
 Post subject: Re: Rear axle with lock
PostPosted: Thu Oct 11, 2012 1:53 pm 
Posesor ARO
Membru Rang 0
User avatar

Joined: Wed Feb 08, 2012 11:56 am
Posts: 20
You can convert a simple axis of the axle lock ON/OFF. There is a possibility?


Offline
 Profile  
 
 Post subject: Re: Rear axle with lock
PostPosted: Sun Jan 06, 2013 2:00 am 
Posesor ARO
Membru Rang 0
User avatar

Joined: Wed Feb 08, 2012 11:56 am
Posts: 20
hi i bought the axle rear with lock.
I checked the ratio is probably 41/11 as well as in the old axis. I just had to change the mode (satellite) has been cut (bad state). I made everything already.

at this moment i worked on on/off difflock:)


Attachments:
PIC_0450.JPG
PIC_0450.JPG [ 713.21 KiB | Viewed 7369 times ]
100_8061.JPG
100_8061.JPG [ 858.31 KiB | Viewed 7369 times ]
Offline
 Profile  
 
 Post subject: Re: Rear axle with lock
PostPosted: Mon Jan 14, 2013 1:55 pm 
Membru CLUB
Membru Rang 9
User avatar

Joined: Wed Sep 09, 2009 9:47 am
Posts: 498
Location: IASI
Have you installed the locker in your Aro? It it interesting, because in Romania lockers with 41/11 ratio are rare, most of them had 33/8 ratio ;)



_________________
Ciuveie: ARO244, Daewoo Tico
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 2 [ 13 posts ]  Go to page 1, 2  Next

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

cron